Mixing instructions Arjay 6011

Over the years boat repair process has improved tremendously. Arjay has been there every step of the way.  Arjay enables repairs that are minimally invasive, take less time, and are cost effective. It is as easy as one two three. 

Step 1.  

Prep the surface where you are pouring the product making sure there are no gaps, voids or holes

Step 2.

Mix the MEK with the resin. We have portioned out all of the products so that way you could mix last material at a time. Take the entire bottle of MEK and pour inside the whole gallon of resin. Mix well with a stir stick for 3 to 5 minutes or until the MEK is thoroughly combined. We use a red dye MEK to help you see when it is mixed thoroughly

Step 3.

Once the product is completely mixed, pour the product into the cavity. It will start to set up within 21 minutes at 77°F and be fully cured in 24 to 48 hours.

 

 

 

 

 
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

0 comments

Article is closed for comments.